Ernest Hemingway Lived His Life To The Fullest. He Experienced More Th

Ernest Hemingway lived his life to the fullest. He experienced more than any other man. Since not many people traveled as much as Ernest, Ernest shared his experiences in books. In ?The Snows of Kilimanjaro?, ?Hills like White Elephants?, and ?In Another Country?, Ernest Hemingway uses a great deal of dialogue to help the reader identify with the characters in the story to show the reader how he perceives the situation of his experiences. In Ernest Hemingway's short story, ?In Another Country?, a man is shocked by reality when he hurt his leg in World War I. This short story is primarily described with dialogue between the wounded man and other injured patience in the hospital. The short story takes place in Milan, Italy, in the middle of winter, during World War I. The events in ?In Another Country?, that are discussed relate to Ernest's experiences as a Red Cross ambulance driver. One night when Ernest decided to work a longer shift in the trenches, a bomb exploded right next to him. The only thing between Ernest and the bomb was a soldier. Without even thinking, Ernest immediately begin carrying the injured men out of the trench. While Ernest was carrying a man, he was shot in the knee. In ?In Another Country? Ernest describes his experiences in the hospital in Milan. Even though it is never said the narrator in the story is obviously Ernest. The dialogue between the Italian major and the narrator of the story, first is focused on the majors hand injury, and the machines that are suppose to provide the miracle cure for the major's and the narrator's injuries. But what the reader quickly learns is that the major suffers not from the injury of his hand, but the loss of his wife. The machines becomes a hollow promise with unbelievable photographs with miracle cures, but the message is the majors life is empty with the loss of his wife. In the mitts of all the war and wounds, what really mattered to the major was the love of his life. The narrator was told not to marry because he could lose everything which really put back in focus what is in important, the love of ones life. This surprisingly had a great effect on Ernest's life. Ernest was married four times. He could never settle down with just one woman. For that matter, he couldn't settle down anywhere for a long period of time. He was afraid he would grow too attached to something and then lose it. ?A man must not marry...he cannot marry, he cannot marry, if he was to lose everything, he shouldn't not place himself in the position to lose that. He should not place himself in a position to lose. He should find things he cannot lose.? (Hemingway 582) Hemingway practically lived by these words that the major said to the narrator in ?In Another Country?. In Ernest Hemingway's short story, "Hills Like White Elephants", a couple is depicted, primarily through dialogue, in a conflict over an issue which is really never mentioned, but is obviously an abortion. The story takes place at a railroad station in the Ebro Valley of Spain. The issues discussed in the story are amazingly similar to events which haunted Ernest's life. The characteristics of the man portrayed in the story are depictive of Ernest. One prevalent theme within the story "Hills Like White Elephants" is alcohol. The story takes place in a bar at a railway station and begins with a man and a woman sampling various alcoholic drinks which include "cervezas" and "Anis del Toros." It becomes clear that drinking is a major part of the couple's relationship when the woman later remarks, "That's all we do, isn't it. . . try new drinks."(Hemmingway 422) Alcohol played an extremely significant and extensive role in Ernest's life. Ernest commonly visited bars in the morning and would drink throughout the remainder of the day. Ernest's fourth wife, Mary, commented that she and Ernest "drank champagne and brandy always" (Hemingway 422).Ernest's wives would find empty bottles of whiskey under his bed because he would often drink himself to sleep. Alcohol dominated Ernest's life as well as his relationships with women. Travel

Business management and Change summary

Business management and Change summary 9.1HSC Topic 1: Business management changeThe nature of managementThe importance of effective managementDefinitionsManagement - The traditional definition of management is: The process of co-ordinating a business's resources to achieve the goals of the organisation.-The more contemporary definition of management views management as the process of working with through people to achieve business goals in a changing environment. Efficient effective use of resources is crucial to this.Effectiveness - Measures the degree to which a goal has been achieved.Efficiency - Weighs the resources needed to achieve the goal against what was actually achieved. (Cost Vs benefits)Management hierarchy-There are three levels of management, top management, middle management supervisory management. Level of responsibility increases from supervisory to top management but the level of technical skill decreases as it goes from supervisory to top management.Top management-Responsible for direction succes s of the business's activities, the long-term strategic plans needed to meet objectives.English: Business center at State University of Ma...-In some businesses key members of management regularly attend board meetings to outline the activities direction of the business under their control. Although directors are not directly responsible for the day-to-day management of the business, they usually have extensive business backgrounds.Middle management-Responsible for interpreting carrying out policies throughout the firm, as well as the successful operation of certain divisions or departments.-Responsible for administering the budgets, formulating departmental policies plans that are consistent with the firm's overall policies plans.-Responsible for appointing the bulk of the new employees needed by the organisation.Supervisory management-Supervisory management forms the link between top management the workers in an enterprise by channelling information between them.-Supervisor y managers are responsible for seeing that jobs are done properly. They are therefore chosen for both their ability to motivate their workers ...

Minimum wage Term Paper Example | Topics and Well Written Essays - 750 words

Minimum wage - Term Paper Example There have been two proposals for adult minimum-wage and teen wages in the United States. Adults need the minimum-wage for living expenses and teens need them to learn the responsibility and pay expenses of their own. The research has uncovered many factors that impact upon these questions; as well as the number of jobs that are attainable in the workforce. As the economy is changing, firms are questioning their future finances to meet the dual standards of minimum-wage and population growth. These issues overlap invariably for everyone in the workplace as Hamilton firm studies give the results with minimum wage and the projected time it will take to rise out of the economic stagnation the country is in at the present time. Said one set of researchers, â€Å"We also continue to explore the nation’s ‘jobs gap’ or the number of jobs needed to return to pre-recession employment levels (Harris & Kearney, 2014). Figure 1.0 below denotes the overall impact of increasin g minimum wage; based upon the number of individuals within the workforce that would have been â€Å"pushed out of poverty† as a result of this increase. The issue of the minimum wage has been under discussion for many years. Ultimately, the United States is one of a handful of countries around the world that legally institutes a minimum wage that the worker is able to receive. This is done to ensure that the workers are not taken advantage of and paid less than a â€Å"living wage†. However, the fact of the matter is that a â€Å"living wage†, as minimum wage has oftentimes been referred to, is ultimately in effect, a subjective measurement. However, minimum wage is oftentimes utilized as a means of supporting entire families within the lower socioeconomic strata of the United States; something it was never designed to do. When one considers the fact that the current rate of unemployment within the nation’s teenagers is in

Discuss the relationship between the orthodox and the marginal, Essay

Discuss the relationship between the orthodox and the marginal, referring closely to at least two texts we have discussed on the unit - Essay Example It made its presence felt in the field of art, science, history, religion, literature, philosophy and politics as well as other aspects of intellectual inquiry. Scholars and thinkers of this era, sought out in search of ancient texts written in Latin or ancient Greek which had been long lost and forgotten into obscurity, which fuelled their desire to increase and improve their worldly knowledge - a concept totally in contrast to the transcendental spirituality strongly propagated by medieval Christianity. These scholars, however did not denounce or reject Christianity, but this cultural shift and the quest for knowledge did brought about a change in the way religion was approached by the intellectuals and was evident in many areas of their cultural life. Shakespeare’s Richard III and Christopher Marlowe’s The Jew of Malta and Dr Faustus, all three of which were widely popular and yet severely criticized mainly because of it’s content and candid use of language, and study them in the light of Renaissance – an era of immense exploration and questioning of ideas and well established philosophies. Although there exist many views regarding the exact date of the Renaissance period in history, for the purpose of this essay, the period between 14th to 17th centuries is considered as the Renaissance Era. In England, the Elizabethan era marked the beginning of the Renaissance Era, with the works of such writers as William Shakespeare, Christopher Marlowe, John Milton and Edmund Spenser. This led to the development of new ideals on humanism which were far more liberal and secular as opposed to those in the medieval era to the chagrin of the yet unquestioned Christian backdrop. Much of the literary work was dedicated to religion or Church, as a result it had profound effect on contemporary theology, particularly the way in which the relationship between man and god was perceived. The Renaissance thus could well be perceived as a time of religious

People and Organizations Essay Example | Topics and Well Written Essays - 2000 words

People and Organizations - Essay Example Assembly lines were dedicated to the production of a single thing, implying the development of dedicated machine tools and workers, operating individually rather than as a work team, were responsible for the performance of single tasks within the assembly process. The implication here is that the said philosophy is funding upon the division of a single project/process into its constituent elements and the total dedication of man and machine to the efficient and timely execution of those single tasks. The Fordist production system, as defined in the above, reduced the cost of automobile manufacturing by 90% and led to the evolution of mass production and the associate mass consumption, and consumer culture. Although incontrovertibly efficient, however, it was not flexible and led to the accumulation of significant inventories. This, however, does not imply that the Fordist system has passed out of existence since several of its elements have been integrated into contemporary organizations and management systems. These elements are lack of specialization, as in workers and employees being able to fulfill a number of tasks if and when required, control over the business processes, efficiency predicated on the division of single projects into its constituent parts, calculability, predictability and, importantly, the organization as an efficient machine. In the final analysis, therefore, while the Fordist system of production may have been replaced by others more compatible with current requirements and realities, its philosophical elements have survived and have been integrated into organizational management. II Despite their positive impact upon production and their contribution to the evolution of more efficient and effective organizations, Taylorism and Scientific Management were, as a result of the controversy they inspired, replaced by the human relations approach to management. Following a brief overview of both, the differences between the two approaches shall be elucidated. Scientific management adopts an objective, rational approach to organizational management, such as which decentralizes socio-cultural and human factors and considerations. This approach advocates the division of labor in the production process for the attainment of maximum productivity, even as it insists upon the separation of the physical from the mental tasks. The aforementioned practices are predicated on the belief that the work process is measurable, in that the componential elements of a single process can be quantified, just as the steps involved in the completion of each can be measured. The implication here is that through the rational quantification of work process steps, the calculation of the time it tales to complete each, the work process can evolve into a semi-automatic and highly efficient phenomenon. Scientific management, as may have been determined from the preceding, marginalizes the human factor, to the extent of rendering the work process an unthinking and routinised one wherein workers are isolated one from the other. Its focus on the rational, leading to its failure to acknowledge the human factor was a source of criticism and controversy. More importantly,

Globalisation And Fierce Competition Causing Shorter Product Life Cycle Business Essay

Globalisation And Fierce Competition Causing Shorter Product Life Cycle Business Essay In an era of globalisation and fierce competition, the introduction of products with shorter and shorter life cycle and the heightened expectations of customers have forced companies to invest in and focus attention on their supply chain. Companies must be able to configure and utilize worldwide resources to keep up with the competition. It involves sourcing products from most appropriate manufacturing facility, keep balance between inventory, transportation and manufacturing cost and match supply and demand under uncertainty (Simchi-Levi, Kaminsky Simchi-Levi 2003). With the significant increases in different products, coupled with demands for higher throughput and reduced inventory, postponement will be one of the strategies used by the companies. The aim of this essay is to examine into the link between postponement and warehousing. The purpose of this essay is to discuss how a warehouse may play a role in postponement. This essay will begin by understanding the concept of postpo nement, the need and usage of postponement and types of postponements with different postponement activities and its lead time and cycle time restrictions. It will then look into the topics of inventory and warehousing such as the roles of the warehouses and the distribution methodologies. It will conclude by linking the use of warehouses in the practice of the postponement strategies. Concept of postponement Postponement is first implemented in manufacturing processes to reduce cost of inventory and improve service level within the company while the product variety increases. The concept of postponement is to delay the change in form, identity and place to the latest possible point until customer commitments have been obtained (Battezzati Coletta 2008). It is by exploiting the commonality between items and by designing the production and distribution process so as to delay the point of differentiation (Tayur, Ganeshan Magazine 1999). Postponement is closely intertwined with modularization where products in a certain product family are designed where all of them consist of different standardized units. With modularization, combination of different standardized sub-components allows the producing of different end products (Dekkers 2009). The form, function and place of the product are altered and is in contra with the push systems in which goods are manufactured entirely in anticipation of future customer orders and stored downstream without customers formulated specifications (Hoek 1997). Anderson (2004) wrote that postponement is a mass customization technique that is applicable for certain products that can have their variety postponed until just before shipping. Hoek (1997) illustrated a list of methods for achieving mass customization: Create products and services that are customizable by customers (involving design function) Modularize components to customize finished products and services (involving the manufacturing, distribution, marketing function and the product design). Provide quick response throughout the value chain (involving the design, manufacturing, distribution and marketing function). Customize services around standard products or services (involving the distribution and marketing function). Provide point of delivery customization (involving the marketing function). The need and usage for postponement Hoek (1997) stated that the application of postponement strategies is increasing in the practice of international business. Final processing or manufacturing activities are moving either upstream from national operations or downstream from global production plants. The biological products life cycle of product is the concern in respect to inventory risks and this is in contrast with electronics industries where short product life cycles in the market are a key driver of postponement. Postponement reduces the uncertainty and risks coupled with product variety. In additional, it saves costs and adds values to the supply chain by eliminating obsolete inventory and making the product to customers specification more easily (Baluch 2006). The accelerating need for simultaneous product differentiation, rapid delivery, regional product variation and competitive cost levels are also the factors that led to the usage of postponement strategy (Hoek 1997). Types of postponements Bowersox and Closs (cited in Hoek 1997) stated that there are three generic types of postponement: form, time and place postponement. Form postponement refers to the postponement of final manufacturing or processing activities; time postponement refers to the delaying of the forward movement of goods until customer orders have been received; place postponement refers to the positioning of inventories upstream in centralized manufacturing or distribution operations to postpone the forward or downstream movement of goods. With the combination of time and place postponement, it is referred to as logistics postponement. An example is whereby in centralized European distribution structures where goods are stored at a limited number of central locations and shipped to customers on the basis of actual orders. Depending on the type of final manufacturing operation, the type of product and market, Cooper (cited in Hoek 1997) specified four possible final manufacturing structures in postponement: unicentric manufacturing, bundled manufacturing, deferred assembly, deferred packaging. In unicentric manufacturing, the final stage of manufacturing is delayed until the point of consumption (Tayur, Ganeshan Magazine 1999). This type of postponement is used through integrated manufacturing in a global manufacturing plant, distribution to order, for global brands with standard formulation and peripherals for example CPUs. In bundled manufacturing, it is forecast-driven where final manufacturing in a continental plant, for products with a global brand, standard peripherals and different formulation, for example TVs. In deferred assembly, it is order-driven where final manufacturing or processing in the international distribution channel, for products with a global brand and different formulation and peripherals. Lastly on deferred packaging, it refers to packaging and configuring shipments in a local warehouse, for products with a global brand, standard formulation and different peripherals (Hoek 1997). Postponement activities Zinn and Bowersox (cited in Hoek 1997) presented in another fashion that focus on the activities. Five types of postponements are listed: labelling postponement, packaging postponement, assembly postponement, manufacturing postponement and time postponement. According to Hoek (1997), labelling and packaging postponement is related to the level of postponement in deferred packaging, both impacting the place and form of the finished product. For assembly and manufacturing postponement, it is in related to bundled manufacturing and deferred assembly where both impacting the form and place of the finished product and also its function. The distinction between assembly and manufacturing postponement is the use of various sourcing locations and the resulting converging stream of goods. Manufacturing postponement operation is obligated to have a complete job-shop layout in manufacturing postponement which contrasts to assembly postponement systems where products are sourced mainly from one source, only some peripherals or additives may be sourced locally. And lastly on time postponement, it is related to the level of postponement in unicentric manufacturing, in which the place of the finished goods in the supply chain is impacted. Examples of postponements strategies Robeson, Copacino and Howe (1994) have shared some examples of different postponement strategies used by various companies. Benetton have used manufacturing postponement or bundled manufacturing where the fabrics are dyed after the completion of the stitching processes, in which they are more able to react quickly and ship products of greater variety. Dell Computers is one of the examples where its standardised sub-components are kept standing by and the product is assembled upon order as part of the assembly postponement or deferred assembly structures. Hewlett Packard is another company that uses the packaging postponement strategy or deferred packaging where it handles the multilingual requirements of its customers through packaging postponement by including an instruction manual relevant to the language of the customer at the point of sales. An example for labelling postponement is for companies in food industries. Labelling is postponed until food marketing companies buy and bra nd it at different times during the year according to product and market conditions. Labelling postponement minimizes the risk of inaccurate forecasts on inventory and economizes on canning production during a busy season. Lead time and cycle time restrictions in postponement The evolution of a products variety, volume and weight throughout the process influences the extent to which it is possible to save transportation and inventory carrying costs by postponing variety, volume and/or weight increase. Short lead times may not require anticipation if final manufacturing can be performed within short cycle times. Manufacturing postponement is possible only when required lead times allow for a number of days additional lead time on top of transportation times. Products or activities can be performed with short lead times or cycle time for assembly postponement. Similarly on packaging and labelling postponement, it is more focused on rapid lead times. However, because of cycle time restrictions on form postponement, very short lead times is impossible and may also require very localized distribution channels at the extreme positioning inventories very close to customers in local depots (Hoek 1997). Inventory and warehousing According to Baker (2007), inventory cost took up 13 percent of the total logistics costs while warehousing accounted for a further 24 percent in the survey of logistics costs in Europe. Being significant in cost terms, warehousing play an important role in modern supply chain for better customer service. Product availability is being a key service metric and warehousing is being critical to the success of failure of many supply chains. Waters (cited in Baker 2007) indicated that increasing globalisation has led to longer supply lead-times which conventional inventory control theory resulted in greater levels of inventory to provide the same service levels. With the addition of more distant supply lines, there is a possibility of increasing variation in supply lead-time and increased the amount of safety stocks. Another factor is the transport economies of long distance movements where cost economies are be achieved by despatching in larger quantities with full container loads that i ncreased cycle stocks. Main role of warehouses According to Frazelle (2002), there have been with all the initiatives in e-commerce, supply chain integration, efficient consumer response, quick response and just-in-time delivery, the supply chain connecting manufacturing with end consumers can never be so well coordinated that eliminate the need of warehousing. The role and mission of warehouse operations are changing and will continue to change dramatically in the modern supply chains. Warehouses play several vital roles such as: Raw material and component warehouse: For holding raw materials at or near to point of induction into a manufacturing or assembly process Work-in-process warehouse: For holding partially completed assemblies and products at various points along an assembly or production line Finished good warehouse: For holding inventory to balance and buffer the variation between production schedules and demand Distribution warehouse and distribution centres: For accumulating and consolidating products from various points of manufacture within a single firm, or from several firms, for combined shipment to common customers. Fulfilling warehouses and fulfilling centres: For receiving, picking and shipping small orders for individual consumers Local warehouses: For distributing in the field in order to shorten transportation distance to permit rapid response to customer demand Value-added services warehouses: For serving as a facility for product customization activities to be executed, such as packaging, labelling, marking, pricing and return processing Dekkers (2009) added that these raw materials, work in progress and finished goods are stored in the warehouse to feed into production or to satisfy customer needs. The need of carrying inventories is due to the uncertainty in supply, future demand and lead-times that companies are faced with. Carrying inventories is in order to be use as buffer between different demand and supply rates. Also in the situation where suppliers have problems with delivery or qualities of materials, raw materials held in inventory can avoid stock-outs situations. Work in progress inventories are maintained because of the poor maintenance, unreliable working or fast schedule changes. Carrying inventories is also to provide for anticipated changes in demand and supply where there may be a drastic change in price of availability of raw materials or planned market promotion or where business is seasonal. According to Bask (2001), all manufacturing is executed before the products are distributed to the decentralized distribution system close to customer in a full speculation postponement strategy. Companies can have a more cost-effective production and purchase in producing or purchasing materials in lots. Due to ordering costs, quantity discounts and transportation cost in large lots, economies of scale are achieved as large standardized product lot-sizes can be manufactured and distributed. On the other had, the logistic postponement strategy differs from full speculation strategy with decentralised distribution system by using centralized inventory in which finalized products are distributed to a larger geographic area. Inventories were reduced with the advantage of high in-stock availability. Thereafter, products are transported in large lot-sizes to centralized warehouse, through with increased onward distribution costs compared to the decentralised system. Other roles of warehouses According to Baker (2007), the role of warehouses is theorised in many text books that the key warehouse functions are inventory holding and the servicing of customer orders from that inventory. Drucker (cited in Baker 2007) have stated that other roles for warehouses are being seen to be increasing important as they changed from holding yards to switching yards. Higginson and Bookbinder (cited in Baker 2007) listed of the roles of distribution centres as: Make/break-bulk consolidation centres for consolidating customer orders together into one delivery to gain transport economies. Cross-dock centres for satisfying customer orders from another source (e.g. a manufacturing plant) by passing through the distribution centre within a few hours Transhipment facilities for changing transport mode (e.g. from large line-haul vehicles to smaller delivery vehicles). Assembly facilities on which the final configuration of the product to individual customer requirements can take place. Product-fulfilment centres for responding directly to product orders from the final consumer (e.g. as internet fulfilment operations). Returned goods depots for handling unwanted and damaged goods, as well as goods returning under environmental legislation such as for product recovery and packaging waste. Miscellaneous roles, such as customer support, installation and repair services. Baker (2007) commented that a number of the above roles may be associated with some of the concepts, such as agility, production postponement and time compression and are recognised as increasing trends in warehousing in current modern supply chains. Conclusion Some business models particularly applicable to fashion and high-technology industries, they are suited to identify consumer trends and rapidly pushing product directly to the market. The use of flexible manufacturing systems, production postponement and the centralisation of inventory are put in place for this cause. With postponement strategies in place, it would be possible to identify the trade-offs between inventory and other supply chain elements, such a purchasing (e.g. bulk discounts on goods at lower unit purchase prices), manufacturing (e.g. lower production costs through less frequent change-over and hence larger batch sizes) and transport (e.g. full container load transport at lower unit transport costs) by utilizing the roles of the warehouse that may include a mix of elements such as inventory holding, order consolidating, cross docking and postponement activities.

Christian Unity and Ecumenism Essay -- Ecumenicalism, Ecumenical Movem

The ideal of unity seems to be of great importance in the religious world, but rarely is it ever achieved among professed Christians. However, it is vitally important to comprehend unity in its Biblical light. Jesus prayed in John 17:21, â€Å"That they all may be one, as thou, Father art in me, and I in thee, that they also may be one in us: that the world may believe that thou hast sent me.† By definition, unity is the state of being one. In order to have a unified church every member must be one one with the Father and the Son. Subsequently, to achieve such an oneness, each member must be perfectly holy, because God is holy. Unfortunately, this is where a clear contrast is made between the saints and mere religious professors. Religious professors practice ecumenism at the cost of disregarding God's word. Religion will sacrifice the doctrine of Christ in order to achieve an outward union. Religion will make allowances for sin, worldliness, heresies, and other spirits of ungodliness in order to gain a universal, all inclusive church. Ecumenism is the spirit of the age and its origins can be traced to the pits of hell, the promoter of Babylon. Ecumenical spirits influence various religions to lay aside theological differences, and accept and tolerate diverse beliefs coming together and forming ecclesiastical bonds. Historically, Catholics and Protestants fought each other, and not only through verbal exchange, but through physical means as well. World and religious leaders today advocate accepting all faiths and tolerance of differing viewpoints. For the most part they reflect the ideals of the general consensus. Popular opinion suggests that there are various paths to God, and it is narrow minded to believe there is only on... ...ls short of it will be eternally lost. The message of the Church of God is â€Å"come out of her my people and be not a partaker of her (Babylon) sins.† Come out of all false religion, even if it be under the guise Church of God. Renounce sects, denominations, and systems of men! Forsake ecumenism for it is the promotion of Satan and is available at a bargain rate at almost every religious grocer's market, but at the price of eternal damnation. It costs nothing to obtain the approval of religious establishments, but will cost man his soul because it does not obtain the approval of God. Ecumenism is of the flesh and has deceived and will continue to deceive multitudes. There is only one kind of unity that meets the approval of heaven and the criteria of God's word, and it is the unity of the spirit. May fellowship first begin with God, and with his Son Jesus Christ.

Health Care Innovation Essay

Asthma is most common in children it begins at infancy and continues to adulthood. Approximate 40,000 Americans miss school or work. This is costing the United States economies about $56 billion a year. Research companies are coming up with 74 new medicines to treat or present asthma. By producing new medicines it will help reduce the cost of asthma. Asthmas are often described with symptoms of a cough which can be worse at night. Wheezing is a noise heard in the airways this is most common in children who live in urban areas. They may be exposed to the most dangerously cock roach antigens, dust mites or pet danger. The high risk for the children had more hospitalizations unscheduled medical visits. Patients can face multiple barriers to care such as lack of routine pediatrician visits and have no access to asthma specialty care. The benefits patient’s especially preschool children there are a Head Start program in Baltimore Maryland, where all the children in the program can receive services through a pediatric asthma clinic while also learning and educating themselves from asthma educators. The mobile clinic offers asthma examination and prescriptions along with parent education about the disease. The asthma educator does a home visit where he or she explains how the program works and how the parents can learn to communicate with the pediatrician another option would be to offer the family to accompany them to their physician’s office. Each year Breath mobile sends forms home with for parents interested in a visit. The parents fill out the form and have the child bring it back to school the next day. Next the assessment where each child gets a form and the screening comes back with presence symptomatic asthma. The staff reaches out to them to schedule a visit during school hours where both child and parent need to attend. A team of pediatric allergist or pulmonologist comes in with a NP, RN, where the examination takes place with each child. Their main focus is on medical history and testing the child’s lung function. Medications should be taken to prevent any flare up. Families receive asthma education and also to follow up with your primary care physician. Some of the new medicines they are trying out is a momocinioal antibody that inhibits eosinophils( a type of white blood cell) form accumulating in the lungs. Next, a new inhalation therapy that harnesses the body’s natural defense in the airway against asthma. Lastly, a medicine that blocks the pro-inflammatory effect of prostaglandin in allergic asthma. (innovations.org 2012) Another development is with 4 new medicines the first one is reducing eosiophil accumulation which means the white blood cells is important for killing parasites in the body, although it can occur in your lung tissues which will damage the lining of your air passage. Second, controlling pathogens is an inhalation therapy. Third alleviating allergy systems there is a protein called interieukin that plays a role in the symptoms of allergic asthma. The increased mucus may contribute to the airway obstruction. Another one is blocking inflammatory response where the prostaglandin and protein receptor crth2 of allergens will cause imflammorty cells to flare up. I think this asthma innovation will decrease health care spending. By offering more services such as these above more children will be able to breathe better. Their not many appointments scheduled or kept. Some of the children had no change in symptoms. When bringing a mobile clinic it did not change the access of care. Families should be more educated about asthma, and be able to have a community advocate. Let parents choose convenient times include other options for expanding interventions. Every child that suffers with asthma will benefit from this and the parents will be relieved such services existed. This will help them live a happy life and to control there breathing would be helpful also and be able to avoid asthma attacks. In addition the number of hospitals visits for pediatric asthma medical assistance has increased. This is measured by how many ambulatory visits, emergency department use. Since 2000 ambulatory visits are increasing due to disease severity and health care utilization. The youngest boys (0-4 years of age) used ambulatory care and hospital services more frequently than did girls of the same age, but different according to sex decreased to insigifant levels in the 11-17 year old age group. (hing, 2004) Path physiology of Asthma Airway inflammation continues to expand and may be an alliance of many cells types. Asthma can be difficult to diagnosis in infants and toddlers. Wheezing has been suggested as the most important symptom in identifying asthma in disease population studies. (Gergen 1998) With the variety of etiologies, asthma is characterized by heterogeneity. The improved phenotype was to classify the missing compounds of heritability. The term phenotype, as introduced by Johannes and Shull was intended to characterize different â€Å"types† of organisms distinguishable by their observable characteristics (eg, shape, structure, size and color.) New Innovations Along with new research and development of diagnostician wheeze indemnification. A deceiver called Pulmotrack and wheezeometer will help with young children who are unable to cooperate. This device was successful used in brochoprovocation testing in infants. The current asthma inhaler children are using cost effective and it is the safest scientific approach for asthma therapy. While you are at your physicians office the cost is determined by which drug of choice, availability and reimbursement options. The device the doctor chooses should be tailored to their age. With health care spending on this innovation will stay the same? Unless they are able to determine a better treatment for kids. I think parents and doctors should be educated about the risks and medication using. If they do need to change medications for any reason then go back to your physician and have them look it over. Every patient should have a written asthma plan which should include the following: regarding triggers, medications, and emergency contracts. This information should be reviewed at every visit. Intervention is the best out come for asthma patients, whether a school based clinic, doctor’s office, or a parent helps them out. Factors are still missing with regards to epidemiology, pathophysioogy environmental control these have yet to be resolved. Asthma is diagnosed in children from infancy to adulthood it can come from dust mites, air in the environment tobacco smoke. Researchers are studying new ways to treat asthma for patients. In developing new medicines to kill parasites by controlling pathogens while targeting interleukin and environmental allergens. With all this new technology and medicine coming into the future children will be able to have better control over there asthma systems and will not have to worry about it all their life. References Eakin MN, Rand CS, Biderback A, et.al. Asthma in Head Start Children. Effects of the Breathmobile Program and family communications on Asthma outcomes. Journal of Allergy and Clinical Immunology. Published online November 21, 2011. Retrieved from http://www.jacionline.org/article/s0091-6749(1)01622-8/abstract Gergen PJ, Mullay DI, Evans R III. National Survey of prevalence of asthma among children in the United States, 1976-1980. Pediatrics 1988; 81(1);1-7. Hing E, Cherry DK, Woodwell DA, National Ambulatory Medical care survey: 2004. Advance data from vital and health statistics; no 374. National center for health statistics; 2006. Innovation in Action: The Improving Asthma care for children programs. Retrieved from http://www.pediatricasthma.org/Medicaid_managed_care Innovation.org Asthma March 5, 2012. Retrieved from http://www.inovovatioin.org/index.cfm/futureofinnovation/newmedicineindevelopment/asthma.

Social Networks Example

Social Networks Example Social Networks – Personal Statement Example Social Networks Submitted to, Submitted By, of the Submitted on, [August INTRODUCTION The present day human society is poles apart from what it was just a few decades ago. It os the effects of information and communications technology that have made this change happen. The human society got boosted socially in the last decade of the twentieth century. This decade gave a boost to communication and information technology thus increasing the social media popularity on a whole. Scholars Kling, McKim and King quote as follows (2009), â€Å"Information and communication technologies have transformed our world in many ways; Yet, informal scholarly scientific communication forms a socio-technical interaction network in which communication is influenced by technology but defined by the social structures of scientists and their organizations. â€Å" The inception of internet has widened various horizons for man. Various networks have sprung over the internet that allow user to connect to each other for leisure and fun or for commercial purposes. Social networking or business networking sites are categorized on the basis of the type of connectivity that the said networking site offers. The social networking sites can be categorized by various means that include their mode of connectivity, purpose, and their remuneration, if any applicable. Various studies conducted so far reveal that these sites are not only a source of benefit but also have certain cons associated with them. These cons include privacy, addiction and cyberbullying issues. BUSINESS AND SOCIAL NETWORKING The most current news surrounding social networks is that whether they can be used for serious business processing or not. Since social networking is the hype of the present times they are a potential market for businesses to introduce their products. Most of the internet users go online only to get connected on the social web by signing into the social networking website in which they are registered. BUSINESS AND THE SOCIAL WEB The most prominent business oriented applications that are supported by the ‘Facebook’ social network are related to the Forex. /original forex dealing vendors host these applications. The handling of virtual money by the users of the application enables the trading of stocks in the application. Since trading of real money is absent, not much of profit making is linked with this application. It is stressed that the core purpose of social networks is to provide entertainment and a happy go lucky means to spend leisure time. Most of the Social networking websites’ users are youngsters and teenagers who do not have their real world stakes involved in the social web and are thus not very willing to spend any money on applications that proposes businesses related provisions over their social network. Applications over the social web are also not independent business sublets of their owner businesses. Rather, they are constructed such that they provide a means of marketing their patent business and direct the consumers towards that businesses’ own webpage. Such a promotional attitude by the applications cannot prove to be a profit generating venture. Individual users who possess their personal profiles over the social networking websites are also reluctant in merging their current profiles with heir business curriculum vitae. Users insist that the linking of one’s leisure activities would create a negative impact on his professionalism and would in turn give a back-thrust to the user rather than giving his corporate life a boost. CONCLUSION Social networking platform is not a very ideal platform for promotion of businesses unless the stakes involved on their application sublets fully reflect their owner businesses as individual sublets that have the capability of getting indulged into real world business transactions. REFERENCES: Atal M., (August 22, 2007). Profiting from Social Networking. Bloomberg Business Week. Retrieved from: businessweek.com/innovate/content/aug2007/id20070822_791378_page_2.htm Kling, R., McKim, G., & King, A. (May 2009).† A bit more to it: Scholarly communication forums as socio-technical interaction networks†. [Electronic version]. Journal of the American Society for Information Science and Technology, 54(1), 47-67. Retrieved from: http://bst.sagepub.com/cgi/content/abstract/23/6/444

Just Win the Moment My Journey with Anxiety Professor Ramos Blog

Just Win the Moment My Journey with Anxiety I am jolted awake by people moving and music playing.Where am I?I wonder. I look around and see my friend’s mother next to me, whose shoulder I had fallen asleep on. Then I remember. I’m on my high school’s east coast tour,in New York City, on Broadway, inside a theater, seeingPhantom of the Opera. I feel so hot and cramped. It’s getting harder to breathe. I’m scared. My stomach turns in pain.Oh no,I think,I’m having an anxiety attack.I quickly climb over the people sitting next to me, not caring if I bump into them.I need to get out of here.I sprint up the stairs of the steep balcony.Where is the bathroom in this place?I burst through the opening to the main hallway and see an extensive line.So many people.â€Å"Is this for the bathroom?† I ask a girl standing in line. â€Å"Yeah,†sheresponds.Nonononononono. This can’t be happening. I NEEDto get out of here. Stairs. I see stairs. I go and sit down on the stairs and feel a moment’s relief of calm. I wish it had lasted longer. Then a man approaches. I look up at him. He has such a kind face. He looks like he works here. â€Å"You can’t sit there, Miss,† he says. I I become more upset. â€Å"I’m having an anxiety attack,† I say. He looks at me, confused. â€Å"I’ll be right back,† he says. He runs down the stairs and a few minutes later returns with a folding chair and acold waterbottle. He sets the chairupagainst the wall adjacent to the bathroom line. â€Å"Thank you,† I say to him. He nods and quickly disappears. I start to spiral down the rabbit hole. My heart is pounding, my ears feel like they’re stuffed with cotton, my vision is tunneling. I feel like everyone in the line is staring at me.Chaperones on the tripcome up and talk to me. I’d had a fever for four days straight until this morning, so they think I have a fever again.They try to give me medicinefor a fever, but I’ve already takenmedicine just a few hours ago. I try to tell them what’s wrong. They won’t listen to me. I can barely hear them;Ijustwish them and everyone else would disappear. I wish I would disappear. Suddenly, a woman is kneeling in front of me. She’saveryattractive, middle-aged, blonde woman. â€Å"Are you okay?† she asks me. She seems to be the only person who genuinely cares. â€Å"No,† I say. â€Å"Can I pray with you?† sheinquires. â€Å"Okay,† I say. She prays for me and I feel the slightest bitofcalm.When theprayerends,I am terrified again. God, please help me.This was all I could think for the remainderof the night. It only got worse after this moment. That night and the last 3 days of thetrip became a never-ending nightmare for me. The panic didn’t leave me until I got to the airport to fly home. I barely ate for those lastthreedays,feelingsick whenever I tried to eat. I thoughtthatonce I got back to California and was with my parents again, I would be back to my normal self. And I was, for a few weeks. Little did Iknow,those lastthreedaysof the tripwould haunt me in times to come. I’ve struggled with anxiety and OCD ever since I was in the third grade. I’vealways felt like the odd one out because of it. At times, even going to school was a struggle. It held me back from enjoying things and going on trips. Most people have a misconception of anxiety;they believe that it’s just a little bit of nervousness andthat theycan just say â€Å"Don’t worry!† and everything will be all puppies and rainbows. They’re wrong. Having anxiety is like being trapped in your own body. I remember many times when I would be sitting in class and would suddenly feel a rush of panic flood into my body, almost as if somethinghadbeeninjected into my bloodstream. Itwas so terrifying when it would happen that I became afraid of being afraid.Events and trips that used to be appealing and exciting to me increasingly became things I dreaded and avoided. My life gradually became sucked of joy and excitement and saturated with fear and loneliness. One of the worst parts about this struggle was that many of my peers didn’t understand it. I found it very embarrassing, and still do, to have a panic attack in front of other people. I had a friend who would occasionally make fun of my struggle, like it was some hilarious thing to joke about. It hurt me a lot becauseshewas one of my closest friends at the time and the fact that she made those jokes and no one else stood up for me made me feel even more alone and trapped inside of myself. I went to many therapy sessions, did EMDR (Eye Movement Desensitization and Reprocessing), took medication,practiceddeep breathing, exercised, and listened to podcasts. While these thingsdefinitely helped, I still struggled to be calm again. Mymother(who is a licensed marriage and family therapist)and my fatherhave helped meimmensely. I remember one of the times my anxietyhadgottenreally bad, my dad told me, â€Å"Don’t think about tomorrow. Just win this moment, right here, right now.†Simplyfocusing on the importance of the present really helped take the pressure offme. Although I am not perfect, I have come such a long way from where I began, and through thisI have learned so many life lessons. No, it was not easy. It was incredibly painful and devastating at times. However, I made it through,and I continue to push through. Because of my experience with anxiety, not only have I been able to help some of my friends who struggle with it, but I have also been able to educate some of my peers about anxiety so they canhave a better understanding. As Leo Buscaglia puts it, â€Å"Worry never robs tomorrow of its sorrow, it only saps today of its joy.†, I am reminded to stay present in every moment and push my hardest to enjoy today, while today lasts. â€Å"Hot Auctions Hot BINs End Soon.†Welcome to ComicArtFans!, comicartfans.com/gallerypiece.asp?piece=595672. Leo Buscaglia Quotes.BrainyQuote. Xplore, n.d. Web. 11 Feb. 2019.

The Influence of Intellectual Capital on the Types of Innovative Research Paper

The Influence of Intellectual Capital on the Types of Innovative Capabilities - Research Paper Example Such a project will provide insights to organizations on how different knowledge management strategies create opportunities for organizations to achieve innovations through the use of intellectual capital (Boer and During, 2001, p. 102). Particular emphasis will be on how strategies on human resource management influence a firm’s level of innovation.   Innovation refers to changes in organizational processes or existing products aimed at creating a competitive advantage in the market. Basically, it involves the identification of opportunities and utilizing them with the intention of creating new products, services or work processes (Daft and Weick, 2004, p. 450). Research studies indicate that organizations with higher innovative capabilities have higher chances of succeeding in response to changes in their business environment. There are different forms of innovation but the most common forms include organizational innovation, process innovation and product innovation (Subr amaniam and Youndt, 2005, p. 460). Organizational innovation refers to the development of new structures and management practices. Product innovation relates to the development of new products whereas process innovation involves the development of new technologies used in the production process. The various forms of innovations have different definitions but they all have a common theme. Their common theme is that of the use of knowledge to create competitive advantages by meeting the needs of customers. The fact that innovation involves the identification and utilization of opportunities, it means that there is a continuous process of pursuing new and unique knowledge (Subramaniam and Youndt, 2005, p. 455). Literature materials on the topic of innovation emphasize that knowledge is the most important element that can ensure the success of organizations pin developing new products, technologies, and processes. The main source of innovation is attributed to be the unique knowledge po ssessed by human capital (Daft and Weick, 2004, p. 244). Human capital is also recognized as the main driver of change within the business environment. In the study of the process of innovation, numerous research studies indicate that there is a close link between the management of knowledge and people and innovation. According to Boer and During (2001, p. 122), there exist a lot of research studies that focus on the contribution of organizational knowledge on various forms of innovation. However, most of the research studies only focus on the outcomes of generic innovations such as technology patents and sales revenues from new products. Such studies tend to ignore on studying how knowledge management is connected to innovation. A number of researchers address the topic of innovation in radical and incremental terms. This, therefore, implies that there need to be further research studies on incremental and radical innovations (Subramaniam and Youndt, 2005, p. 453). This is to ensur e there are adequate literature materials on the differences that exist between radical and incremental innovations.

Experiment 9 formal report Lab Example | Topics and Well Written Essays - 1250 words

Experiment 9 formal - Lab Report Example Methodology also involves description of procedures like recording of paired values and subsequent calculation of proportionality constants, means and standard deviations. Results section provided tabulated information together with corresponding graphs for the three experiments. This report also contains a discussion section revolving around findings made in the preceding section. Discussion proves whether the hypothetical claim made earlier is true or false. Finally, a conclusion summarizes main concepts of the experiments. Irrespective of their constituent atoms, all gases obey certain relations with environmental parameters of pressure, temperature and volume. Unique relation of gases to these parameters constitutes the three gas laws. This means that gases have similar physical properties, be it CO2, NO2 or H2O (g). While describing behavior of gases in relation to the three physical parameters acknowledged earlier, a forth variable, specifically the number of molecules, is used. The three gas laws explain behavior of gases when two physical parameters are paired. Technically, behavior of gases in relation to any of the three parameters is independent of each other (Myers, 19). In this case, a gas’ behavior with changing temperature can be measured by keeping the pairing variable, either pressure or volume constant. Practically, gases may show slight variation of variable quantities from theoretically expected values. This explains the concept of ideal gas law, a law that combines relationshi p of all the four essential variables of pressure, temperature, volume and the number of moles. Ideal gas law is written as PV = nRT where n = number of moles, P = pressure, T = temperature, V = volume and R = gas constant with a uniform value of 0.0821 L-atm/mole-K. As acknowledged earlier, relationship between two variables can be determined since behavior of each variable in independent of the other variables. In the experiment, the forth